RM7208 8" Pair of 60° Magnum Runners for Polaris IQ Dual Runner Skis -Snowstuds FST Classic LX Carbides

RM7208 8" Pair of 60° Magnum Runners for Polaris IQ Dual Runner Skis -Snowstuds FST Classic LX Carbides Review

RM7208 8" Pair of 60° Magnum Runners for Polaris IQ Dual Runner Skis -Snowstuds FST Classic LX Carbides Feature

• 60° steering carbide in 2" segments, 3/8" wear bar, stud-welded 5/16" studs
• Carbide brazed deep on four large facets allows for more miles before replacement
• The most wearpads of any runner, placed right where they are needed.
• Snowstuds exclusive lifetime warranty! The only one in the business!
• Sold per pair. Order qty 2 pair to completely outfit a dual runner sled.

It's really no wonder why you've chosen Snowstuds Magnum carbide runners for your sled. Certainly it's because the sharp 60° carbide inserts are buried deep into the bar and brazed in on 4 facets (instead of just 2 or 3) to keep them put. Or maybe it's because they strategically place multiple wear pads at the highest wear points including one right in front of the steering carbide where bar erosion is the greatest. Heck, you probably just like that Magnum's have been made right here in the USA for over 13 years by people who snowmobile, instead of in a sweat shop in a place you can't pronounce. Odds are though, it's because you, your friends and your family have used them for years and wouldn't have it any other way. Whatever your reason, we're glad you chose Snowstuds Magnum carbide runners from Johnmaster. We're proud to offer them.

The picture is an example of the basic construction and is not a photo of the exact runners you will receive. Use the drawing for an idea of what the actual runners you receive will look like. Compare stud locations on your skis to check compatibility before ordering.

This pair should fit the following twin runner ski applications:

POLARIS
2005 Fusion (w/ Dual Runner ski)
2006 Trail Touring (w/ Dual runner ski)
2006 Fusion M10
2006 Edge Touring
2006 HO Touring 700
2006 FS/FST Classic/Touring
2006 Classic (Exc 340)
07-10 FS/FST/IQ Touring
2007 FST IQ LX/Cruiser
2007 600 HO IQ Touring
2007 600 HO IQ LX
2008 FST IQ Cruiser
2008 IQ Turbo LX
2008 600 IQ LX
2011-12 IQ LXT (liquid)

Order qty 2 if you want 2 pair (4 runners) to complete one sled. You could also try our 7600 series Double Downs to eliminate the wearing through problem on the front of these skis.

RM3108 8" Pair of 60° Magnum Runners for Polaris Sidehiller II Skis -Snowstuds RMK Switchback Carbides

RM3108 8" Pair of 60° Magnum Runners for Polaris Sidehiller II Skis -Snowstuds RMK Switchback Carbides Review

RM3108 8" Pair of 60° Magnum Runners for Polaris Sidehiller II Skis -Snowstuds RMK Switchback Carbides Feature

• 60° steering carbide in 2" segments, beefy 1/2" host bar, stud-welded 3/8" studs
• Carbide brazed deep on four large facets allows for more miles before replacement
• The most wearpads of any runner, placed right where they are needed.
• Snowstuds exclusive lifetime warranty! The only one in the business!
• Sold per pair. Order qty 2 pair to completely outfit a dual runner sled.

It's really no wonder why you've chosen Snowstuds Magnum carbide runners for your sled. Certainly it's because the sharp 60° carbide inserts are buried deep into the bar and brazed in on 4 facets (instead of just 2 or 3) to keep them put. Or maybe it's because they strategically place multiple wear pads at the highest wear points including one right in front of the steering carbide where bar erosion is the greatest. It could be that you like how the rolled 1/2" profile bar was designed to protect the carbide as it wears, making them far outlast your expectations. Heck, you probably just like that Magnum's have been made right here in the USA for over 13 years by people who snowmobile, instead of in a sweat shop in a place you can't pronounce. Odds are though, it's because you, your friends and your family have used them for years and wouldn't have it any other way. Whatever your reason, we're glad you chose Snowstuds Magnum carbide runners from Johnmaster. We're proud to offer them.

The picture is an example of the basic construction and is not a photo of the exact runners you will receive. Use the drawing for an idea of what the actual runners you receive will look like. Compare stud locations on your skis to check compatibility before ordering.

Though we have Magnums to fit virtually every OEM and aftermarket ski made, this pair should fit the following applications:

POLARIS
03-06 RMK
03 SKS
04-05 Switchback
03-06 Widetrak LX

RM8506 6" Pair of 60° Magnum Runners for USI 5 Stud Skis -Snowstuds SPX Project X 301 VX-302 Carbides

RM8506 6" Pair of 60° Magnum Runners for USI 5 Stud Skis -Snowstuds SPX Project X 301 VX-302 Carbides Review

RM8506 6" Pair of 60° Magnum Runners for USI 5 Stud Skis -Snowstuds SPX Project X 301 VX-302 Carbides Feature

• 60° steering carbide in 2" segments, beefy 1/2" host bar, stud-welded 3/8" studs
• Carbide brazed deep on four large facets allows for more miles before replacement
• The most wearpads of any runner, placed right where they are needed.
• Snowstuds exclusive lifetime warranty! The only one in the business!
• Sold per pair.

It's really no wonder why you've chosen Snowstuds Magnum carbide runners for your sled. Certainly it's because the sharp 60° carbide inserts are buried deep into the bar and brazed in on 4 facets (instead of just 2 or 3) to keep them put. Or maybe it's because they strategically place multiple wear pads at the highest wear points including one right in front of the steering carbide where bar erosion is the greatest. It could be that you like how the rolled 1/2" profile bar was designed to protect the carbide as it wears, making them far outlast your expectations. Heck, you probably just like that Magnum's have been made right here in the USA for over 13 years by people who snowmobile, instead of in a sweat shop in a place you can't pronounce. Odds are though, it's because you, your friends and your family have used them for years and wouldn't have it any other way. Whatever your reason, we're glad you chose Snowstuds Magnum carbide runners from Johnmaster. We're proud to offer them.

The picture is an example of the basic construction and is not a photo of the exact runners you will receive. Use the drawing for an idea of what the actual runners you receive will look like. Compare stud locations on your skis to check compatibility before ordering.

Though we have Magnums to fit virtually every OEM and aftermarket ski made, this pair should fit the following applications:

USI 5-Stud Skis
All 5 stud USI except Triple Threat. Ask if you need them for Triple Threat
SPX, Project X 301, VX-301

RD6808 8" Pair of 60° Double Down Runners for Yamaha Latest Plastic Skis -Snowstuds RX-1 Apex Nytro Vector Attack Phazer Carbides

RD6808 8" Pair of 60° Double Down Runners for Yamaha Latest Plastic Skis -Snowstuds RX-1 Apex Nytro Vector Attack Phazer Carbides Review

RD6808 8" Pair of 60° Double Down Runners for Yamaha Latest Plastic Skis -Snowstuds RX-1 Apex Nytro Vector Attack Phazer Carbides Feature

• Completely eliminates darting on the trail
• 60° steering carbide on each of two beefy 1/2" bars per ski, stud-welded 5/16" studs
• Carbide brazed deep on four large facets allows for more miles before replacement.
• Wearpads front and back make them last longer than you would even imagine.
• Sold per pair to complete one sled.

It's was unlikely that a part most snowmobilers consider a wear item would actually turn into one of the biggest game changers this sport has seen to date. As surprising as it was, the Snowstuds Double Down carbide runners did just that. In the dark days before they made their debut, darting was just as much a part of snowmobiling as blue smoke and a runny nose. It was accepted that the limiting factor for how much you could ride in a day was going to be how long your shoulders and your patience would hold up. Snowstuds wasn't satisfied with that. After testing what turned out to be about a milk crate full of prototypes they finally nailed it, the widest double runner anywhere! The sport has never been the same...

These super wide Double Down runners will have you steering straighter with less effort and more confidence. That same wide spacing is what helps you carve tight turns, the Achilles heel of most other double runner designs. For 6 years now the Double Down runners have been redefining what the term handling means to snowmobilers, why not see the difference for yourself?

Photo is an example of construction, compare the stud locations on your skis to the dimensions on the drawing to ensure these will actually fit.

Should fit the following:

YAMAHA
05-11 All Models (except 07 Bravo)
2004 All Models (except VK540 III)
2003 All Models (except VK540 III and Mountain Max 700)
01-02 Vmax, Deluxe
01-02 Venture
2001 Phazer Deluxe
2002 SX Viper

RD6606 6" Pair of 60° Double Down Runners for Yamaha Plastic Skis -Snowstuds 98-99 SRX 99 Vmax Carbides

RD6606 6" Pair of 60° Double Down Runners for Yamaha Plastic Skis -Snowstuds 98-99 SRX 99 Vmax Carbides Review

RD6606 6" Pair of 60° Double Down Runners for Yamaha Plastic Skis -Snowstuds 98-99 SRX 99 Vmax Carbides Feature

• Completely eliminates darting on the trail
• 60° steering carbide on each of two beefy 1/2" bars per ski, stud-welded 3/8" studs
• Carbide brazed deep on four large facets allows for more miles before replacement.
• Wearpads front and back make them last longer than you would even imagine.
• Sold per pair to complete one sled.

It's was unlikely that a part most snowmobilers consider a wear item would actually turn into one of the biggest game changers this sport has seen to date. As surprising as it was, the Snowstuds Double Down carbide runners did just that. In the dark days before they made their debut, darting was just as much a part of snowmobiling as blue smoke and a runny nose. It was accepted that the limiting factor for how much you could ride in a day was going to be how long your shoulders and your patience would hold up. Snowstuds wasn't satisfied with that. After testing what turned out to be about a milk crate full of prototypes they finally nailed it, the widest double runner anywhere! The sport has never been the same...

These super wide Double Down runners will have you steering straighter with less effort and more confidence. That same wide spacing is what helps you carve tight turns, the Achilles heel of most other double runner designs. For 6 years now the Double Down runners have been redefining what the term handling means to snowmobilers, why not see the difference for yourself?

Photo is an example of construction, compare the stud locations on your skis to the dimensions on the drawing to ensure these will actually fit.

Should fit the following:

YAMAHA
98-99 Mountain Max 600/700
98 Mountain SRX
98-99 SRX 600/700
99 SX 500/600/700
99 Vmax 500SX/600SX/700SX

RM8706 6" Pair of 60° Magnum Runners for C & A Pro Sport II Skis -Snowstuds Sport II Carbides

RM8706 6" Pair of 60° Magnum Runners for C & A Pro Sport II Skis -Snowstuds Sport II Carbides Review

RM8706 6" Pair of 60° Magnum Runners for C & A Pro Sport II Skis -Snowstuds Sport II Carbides Feature

• 60° steering carbide in 2" segments, beefy 1/2" host bar, stud-welded 3/8" studs
• Carbide brazed deep on four large facets allows for more miles before replacement
• The most wearpads of any runner, placed right where they are needed.
• Snowstuds exclusive lifetime warranty! The only one in the business!
• Sold per pair.

It's really no wonder why you've chosen Snowstuds Magnum carbide runners for your sled. Certainly it's because the sharp 60° carbide inserts are buried deep into the bar and brazed in on 4 facets (instead of just 2 or 3) to keep them put. Or maybe it's because they strategically place multiple wear pads at the highest wear points including one right in front of the steering carbide where bar erosion is the greatest. It could be that you like how the rolled 1/2" profile bar was designed to protect the carbide as it wears, making them far outlast your expectations. Heck, you probably just like that Magnum's have been made right here in the USA for over 13 years by people who snowmobile, instead of in a sweat shop in a place you can't pronounce. Odds are though, it's because you, your friends and your family have used them for years and wouldn't have it any other way. Whatever your reason, we're glad you chose Snowstuds Magnum carbide runners from Johnmaster. We're proud to offer them.

The picture is an example of the basic construction and is not a photo of the exact runners you will receive. Use the drawing for an idea of what the actual runners you receive will look like. Compare stud locations on your skis to check compatibility before ordering.

Though we have Magnums to fit virtually every OEM and aftermarket ski made, this pair should fit the following applications:

C&A PRO SPORT II
C&A Pro Sport II 5" wide ski with reglar bolt pattern runner reversed(see stud dimensions on "larger images")

RM7508 8" Pair of 60° Magnum Runners for Polaris Plastic Skis -Snowstuds XC SP PRO X Edge XCR Carbides

RM7508 8" Pair of 60° Magnum Runners for Polaris Plastic Skis -Snowstuds XC SP PRO X Edge XCR Carbides Review

RM7508 8" Pair of 60° Magnum Runners for Polaris Plastic Skis -Snowstuds XC SP PRO X Edge XCR Carbides Feature

• 60° steering carbide in 2" segments, beefy 1/2" host bar, stud-welded 3/8" studs
• Carbide brazed deep on four large facets allows for more miles before replacement
• The most wearpads of any runner, placed right where they are needed.
• Snowstuds exclusive lifetime warranty! The only one in the business!
• Sold per pair.

It's really no wonder why you've chosen Snowstuds Magnum carbide runners for your sled. Certainly it's because the sharp 60° carbide inserts are buried deep into the bar and brazed in on 4 facets (instead of just 2 or 3) to keep them put. Or maybe it's because they strategically place multiple wear pads at the highest wear points including one right in front of the steering carbide where bar erosion is the greatest. It could be that you like how the rolled 1/2" profile bar was designed to protect the carbide as it wears, making them far outlast your expectations. Heck, you probably just like that Magnum's have been made right here in the USA for over 13 years by people who snowmobile, instead of in a sweat shop in a place you can't pronounce. Odds are though, it's because you, your friends and your family have used them for years and wouldn't have it any other way. Whatever your reason, we're glad you chose Snowstuds Magnum carbide runners from Johnmaster. We're proud to offer them.

The picture is an example of the basic construction and is not a photo of the exact runners you will receive. Use the drawing for an idea of what the actual runners you receive will look like. Compare stud locations on your skis to check compatibility before ordering.

Though we have Magnums to fit virtually every OEM and aftermarket ski made, this pair should fit the following applications:

POLARIS
Fits all Polaris plastic skis from 97-11

except

models with two runners per ski, blow molded skis, or the new Gripper mountain ski.
These have three studs with 7" spacings and will replace all recent 4 stud runners on Edge, IQ and Pro-Ride models.
These even replace the EZ steer plates and 2 bolt runners on models that were equipped with them.